LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Mirror System) >> Repair Instructions >> Power Mirror Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Window Switch & Electrical Connector
    GM888370Courtesy of GENERAL MOTORS CORP.
  1. Insert the mirror switch into the pull cup until the locking tabs engage.
  2. Connect the power window switch electrical connector.
  3. Insert the forward end of the pull cup into the door trim and push forward to engage the hook.
  4. Press down on the rearward end of the pull cup.
    5. Fig 2: View Of Front Door Trim
    GM864943Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  5. Install the pull cup screws.

    Tighten:  Tighten the screws to 2.5 N.m (23 lb in).

  6. Reposition the pull cup liner.
scientia non olet · About LEMON Manuals