Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the front wheel. Refer to Tire and Wheel Removal and Installation (4 Lug Wheel) or Tire and Wheel Removal and Installation (5 Lug Wheel) .

Fig 1: View Of Stabilizer Link At Strut Assembly

Courtesy of GENERAL MOTORS CORP.

Disconnect the stabilizer link from the strut.

Fig 2: View Of Strut-To-Steering Knuckle Nuts & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the strut to steering knuckle nuts.
If applicable, reposition the wheel speed sensor harness and bracket.
Remove the strut to steering knuckle bolts.

Fig 3: View Of Strut

Courtesy of GENERAL MOTORS CORP.

Remove the upper strut cap to body nut.

IMPORTANT: In order to prevent damage to the CV joint boot, place a shop towel over the CV joint.

Remove the strut from the vehicle.
For strut replacement, refer to Strut, Strut Component and/or Spring Replacement .