Installation Procedure
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Place the NEW bushing to the tapered side of the control arm.
- Using the J 41211 , pull the control arm bushing through the opposite direction of the control arm. See Special Tools .
- Install the bushing to the same depth and orientation as noted during removal.
- Remove the J 41211 from the control arm. See Special Tools .
- Install the control arm. Refer to Lower Control Arm Replacement .