Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Use the new TMAP sensor seal provided with the new TMAP sensor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the TMAP sensor into the intake manifold.
Tighten: Tighten the bolt to 10 N.m (89 lb in).

Fig 1: Locating TMAP Sensor

Courtesy of GENERAL MOTORS CORP.

Connect the TMAP sensor harness connector.