Installation Procedure
WARNING: This page is about a different car, the 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Position the air cleaner assembly.
- Install the air cleaner assembly attachment nut.
Tighten: Tighten the nut to 10 N.m (89 lb in).
- Connect the air cleaner resonator to the air cleaner assembly.
Tighten: Tighten the air cleaner intake duct clamp to 5 N.m (44 lb in).
IMPORTANT:
Verify full engagement of the inlet onto the resonator neck.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.