LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls (Introduction)) >> Repair Instructions >> Accelerator Controls Cable Bracket Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  2. Disconnect the accelerator control cable from the throttle body and accelerator bracket.
    3. Fig 1: Identifying Accelerator Control Cable
    GM851308Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2 accelerator bracket bolts (3).
  4. Remove the accelerator bracket (2) from the throttle body (1).
    5. Fig 2: View Of Accelerator Bracket
    GM889862Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals