LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls (Introduction)) >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Depress the accelerator control cable tangs from the pedal lever assembly.
  2. Remove the accelerator control cable from the pedal lever assembly.
    3. Fig 1: Locating Accelerator Control Cable
    GM854276Courtesy of GENERAL MOTORS CORP.
  3. Release the accelerator control cable lug (3) from the throttle body assembly (4).
  4. Depress the tangs on the control cable (2) while pulling the cable through the control cable bracket (1).
    5. Fig 2: Control Cable Bracket View
    GM782246Courtesy of GENERAL MOTORS CORP.
  5. Remove the control cable from the bracket.
  6. Disconnect the control cable (2) from the support clip (1).
  7. Remove the cable from the vehicle.
    8. Fig 3: View Of Control Cable & Support Clip
    GM782235Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals