Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fuel pump module assembly. Refer to Fuel Pump Module Replacement .
Release the fuel level sensor wiring harness from the molded-in tab (1) on the pump module bowl.
Disconnect the fuel level sensor electrical connector from the pump module.
Depress the retaining tab (2) on the sensor and begin to slide the level sensor away from the pump module.
Carefully slide the level sensor the rest of the way off of the pump module.

Fig 1: View Of Fuel Pump Module Assembly

Courtesy of GENERAL MOTORS CORP.