LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls (Introduction)) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Use the new MAP sensor seal provided with the new MAP sensor.
  1. Install the MAP sensor (2) into the intake manifold.
  2. Connect the MAP sensor harness connector.
    3. Fig 1: Exploded View Of Throttle Body
    GM782280Courtesy of GENERAL MOTORS CORP.
  3. Install the accelerator cable bracket. Refer to Accelerator Controls Cable Bracket Replacement .
  4. Install the air cleaner outlet resonator. Refer toAir Cleaner Outlet Resonator Replacement .
scientia non olet · About LEMON Manuals