LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls (Introduction)) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  2. Remove the accelerator cable bracket. Refer to Accelerator Controls Cable Bracket Replacement .
  3. Disconnect the manifold absolute pressure (MAP) sensor harness connector.
  4. Remove the MAP sensor (2) from the intake manifold.
    5. Fig 1: Exploded View Of Throttle Body
    GM782280Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: If the MAP sensor seal is damaged, the MAP sensor must be replaced.
  5. Inspect the seal for damage.
scientia non olet · About LEMON Manuals