Power Window Switch: Service and Repair

Power Window Switch Replacement

Removal Procedure





1. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement (Console Shift Lever Bezel Replacement) in Instrument Panel, Gages, and Console.
2. Remove the screws from the power window switch assembly.
3. Remove the switch assembly from the bezel.



Installation Procedure





1. Position the switch assembly.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the screws to the power mirror switch assembly.

Tighten the screws to 2.5 Nm (22 lb in).

3. Install the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement (Console Shift Lever Bezel Replacement) in Instrument Panel, Gages, and Console.