Variable Valve Timing Solenoid: Service and Repair

ROCKER ARM OIL CONTROL SOLENOID VALVE REPLACEMENT

REMOVAL PROCEDURE





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right front wheel.
3. Remove the splash shield.
4. Remove the solenoid and bolts.
5. Discard the O-ring.

INSTALLATION PROCEDURE





1. Install the NEW O-ring (415), solenoid (416) and bolts (417).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the switch to 12 N.m (106 lb in).

2. Install the splash shield.
3. Install the wheel.
4. Lower the vehicle.