October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

Position the child tether anchor tab to the alignment hole in the rear shelf.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the child tether anchor bolt.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).

Fig 1: View Of Child Tether Anchors

Courtesy of GENERAL MOTORS CORP.

Install the rear window trim. Refer to Trim Panel Replacement - Rear Window Shelf (Late Production) in Interior Trim.
Close the anchor bezel, pressing into place until fully seated.