LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Ion 1 Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Position the engine purge pipe (1) to the EVAP canister purge valve (2) and the intake manifold.
    2. Fig 1: Identifying Evaporative Emission (EVAP) Hoses/Pipes
    GM783172Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine purge pipe (1) to the intake manifold.
  3. Connect the engine purge pipe (1) to the EVAP canister purge valve (2).
  4. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
scientia non olet · About LEMON Manuals