LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Low/Reverse Servo Assembly Replacement >> Disassembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly Procedure

    Fig 1: Exploded View Of Low/Reverse Servo Assembly
    GM892835Courtesy of GENERAL MOTORS CORP.
  1. Remove the piston pin assembly from the servo cover.
  2. Remove the snap ring from the servo pin.
  3. Remove the piston and the servo cushion springs from the servo pin.
  4. Remove the servo piston seals from the cover.
  5. Discard the servo piston seals.
  6. Inspect all components for damage.
  7. Inspect the fluid feed holes for the proper opening.
  8. Inspect the bolt hole threads for debris or stripping.
  9. Inspect the seal grooves for damage.
  10. Clean and dry each component.
scientia non olet · About LEMON Manuals