LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Controls - 3.4L - Introduction) >> Repair Instructions >> Spark Plug Wire Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Spark Plug Wire Location On Ignition Coils
    GM162818Courtesy of GENERAL MOTORS CORP.
  1. Install the spark plug wires to the engine.
  2. Install the spark plug wires to the ignition coils.
  3. Fig 2: Spark Plug Wires To Spark Plugs
    GM211485Courtesy of GENERAL MOTORS CORP.
  4. Install the spark plug wires (1, 3, and 5) to the rear bank spark plugs.
  5. Install the spark plug wires to the retaining clips.
  6. Return the engine to the proper position. Refer to Rotating the Engine for Service Access in Engine Mechanical.
  7. Fig 3: Identifying Spark Plug Wire Routing
    GM211481Courtesy of GENERAL MOTORS CORP.
  8. Install the spark plug wires (2, 4, and 6) to the front bank spark plugs.
  9. Install the spark plug wires to the retaining clips.