LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Stationary Window System) >> Repair Instructions >> Window Replacement - Liftgate >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the liftgate window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows (Windshield)  or Urethane Adhesive Installation of Stationary Windows (Rear Window)  or Urethane Adhesive Installation of Stationary Windows (Liftgate) .
  2. Connect the liftgate window defogger electrical connectors to the bus bar.
  3. Install the high-mounted stop lamp. Refer to High Mounted Stop Lamp Replacement (Sedan) or High Mounted Stop Lamp Replacement (Extended Sedan) .
  4. Install the liftgate trim. Refer to Trim Panel Replacement - Liftgate (Lower) or Trim Panel Replacement - Liftgate (Upper) or Trim Panel Replacement - Liftgate (Right or Left) in Body Rear End.
  5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  6. Close the liftgate.
scientia non olet · About LEMON Manuals