LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Automatic Transaxle - Introduction & Repair Instructions) >> Repair Instructions >> Floor Shift Control Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Transaxle Shift Cable
    GM1236459Courtesy of GENERAL MOTORS CORP.
  1. Remove the console trim plate. Refer to Trim Plate Replacement - Front Floor Console (Aztek) or Trim Plate Replacement - Front Floor Console (Rendezvous) in Instrument Panel, Gages and Console.
  2. Use a flat-bladed tool in order to remove the shift cable end from the shift control lever.
  3. Remove the shift control cable from the shift control.
  4. Remove the shift control wire harness from the shift control.
    5. Fig 2: Locating Shift Control Fasteners
    GM828251Courtesy of GENERAL MOTORS CORP.
  5. Remove the shift control fasteners.
  6. Remove the shift control.
scientia non olet · About LEMON Manuals