Mode Valve Assembly
WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
The film valve system has several operating characteristics:
- The cycle time for a mode change will vary based on the starting point of the film valve relative to the requested mode position.
- The maximum time to achieve a mode change occur when the film valve travels between vent and defrost.
- Mode change times may very slightly based on variations in system airflow, temperature and voltage.
- The amount of air rush noise heard when a mode change is requested that causes the film valve to move through three or more primary modes is dependent on blower speed.
- Recalibration will typically occur when the engine is OFF. The actuator noise heard during recalibration may be more noticeable than during normal operation.