LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 653 (Lighting Systems) >> Repair Instructions >> Brake Pedal Position Sensor Calibration >> Calibration Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Calibration Procedure

WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: If the master brake cylinder has been replaced, verify that the correct pushrod is installed before attempting to calibrate the BPPS.
  1. Turn ON the ignition, with the engine OFF.
  2. Install a scan tool. Select the proper vehicle and options.
  3. Navigate to the BCM menu.
  4. Select Special Functions menu item.
  5. Select the BPPS calibration procedure and follow the directions displayed on the screen.
scientia non olet · About LEMON Manuals