Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Install the receiver to the bracket assembly.
Connect the coaxial cables.
Connect the wire connector (1).

Fig 1: View Of Digital Radio Receiver & Wire Connector

Courtesy of GENERAL MOTORS CORP.

Install the rear compartment trim panel. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.
Perform the setup procedure for the digital radio receiver. Refer to Digital Radio Receiver Setup .