Installation Procedure

Fig 1: Removing/Installing Tether Anchor Bezel

Courtesy of GENERAL MOTORS CORP.

Install the tether anchor bezel to the rear window trim.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the anchor bezel fasteners.
Tighten: Tighten the fasteners to 1.4 N.m (12 lb in).

Fig 2: View Of Trim Panel Push-In Fasteners
Courtesy of GENERAL MOTORS CORP.
Install the rear window trim. Refer to Trim Panel Replacement - Rear Window Shelf (Late Production) in Interior Trim.
Close the tether anchor bezel.