LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Lower Anchor Assembly Replacement - Rear No. 1 >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

Fig 1: View Of Lower Anchor Assembly
GM876615Courtesy of GENERAL MOTORS CORP.
  1. Install the anchor assembly into the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the anchor assembly bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the battery cable fastener to the anchor assembly.
  4. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Coupe) or Seat Cushion Replacement - Rear (Sedan) in Seats.
  5. Install the rear seat backs. Refer to Seat Back Replacement - Rear Split Folding in Seats.
scientia non olet · About LEMON Manuals