LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2006 >> Relay 3.9 1, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System >> Repair Instructions >> Sit-N-Lift Control Module Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the upper seat trim. Refer to Sit-N-Lift Upper Trim Replacement .
    2. Fig 1: Removing & Installing Fasteners For Module Bracket
    GM1368553Courtesy of GENERAL MOTORS CORP.
  2. Remove the fasteners from the module bracket.
    3. Fig 2: Locating Electrical Connectors
    GM1368564Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connectors from the module.
    4. Fig 3: View Of Mobility Seat Control Module
    GM1368566Courtesy of GENERAL MOTORS CORP.
  4. Remove the module from the seat base.
scientia non olet · About LEMON Manuals