LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2006 >> Relay 3.9 1, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.9L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Locating MAP Sensor Electrical Connector
    GM1675732Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Disconnect the engine harness electrical connector (1) from the manifold absolute pressure (MAP) sensor.
  3. Remove the MAP sensor bracket bolts and bracket.
    4. Fig 2: Removing/Installing MAP Sensor
    GM1639213Courtesy of GENERAL MOTORS CORP.
  4. Remove the MAP sensor (1).
  5. Inspect the MAP sensor seal for damage, replace if necessary.
scientia non olet · About LEMON Manuals