Fog/Driving Lamp Switch: Service and Repair

Fog Lamp Switch Replacement

Removal Procedure




1. Pull up on the I/P upper compartment in order to release the retaining clips.
2. Disconnect the I/P dimmer switch electrical connector.
3. Disconnect the fog lamp switch electrical connector.




4. Remove the fog lamp switch from the I/P upper compartment.

Installation Procedure




1. Install the fog lamp switch into the I/P upper compartment.




2. Connect the I/P dimmer switch electrical connector.
3. Connect the fog lamp switch electrical connector.
4. Align the retaining clips on the I/P upper compartment to the I/P top panel.
5. Push the I/P upper compartment in order to secure.