Installation Procedure
- Connect the antenna lead-in to the antenna base.
- Install the antenna base.
- Install the screws to the bracket on the antenna base.
Tighten: Tighten the screws to 10 N.m (89 lb in).
- Install the antenna mast to the antenna base by turning clockwise.
Tighten: Tighten the mast to 10 N.m (89 lb in).
- Install the front fender. Refer to Fender Replacement - Front (Coupe) or Fender Replacement - Front (Sedan) .
NOTE:
Refer to FASTENER NOTICE
.