LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Camshaft Position Sensor Housing
    GM1534962Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement - Supercharger .
  3. Remove the underhood junction block. Refer to Underhood Electrical Center or Junction Block Bracket Replacement .
  4. Disconnect the electrical connector from the camshaft position (CMP) sensor.
  5. Remove the CMP sensor studs.
  6. Remove the CMP sensor.
scientia non olet · About LEMON Manuals