Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Connect the cruise control cable to the accelerator pedal.

Fig 1: Locating Cruise Control Cable

Courtesy of GENERAL MOTORS CORP.

Connect the cruise control cable (2) to the cruise control module ribbon (4).

Fig 2: Connecting Cruise Control Cable To Module Ribbon

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The ribbon must not be twisted.

Insert the cruise control cable into the cruise control module until the seal touches the module.

Fig 3: Identifying Twisted Ribbon

Courtesy of GENERAL MOTORS CORP.

Position the narrow cable tab into the narrow slot and the wide tab into the wide slot.

Fig 4: Aligning Cruise Control Cable

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The adjuster tab must be pointing toward the front of the car after installation.

Connect the cruise control cable to the cruise control module by turning the cable clockwise.