Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the CKP sensor O-ring and lubricate with a mineral based grease.
Gently insert the CKP sensor (2) into the block.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the CKP sensor bolt.
Tighten: Tighten the CKP sensor bolt to 10 N.m (89 lb in).
Reconnect the CKP sensor electrical connector.

Fig 1: Locating CKP Sensor

Courtesy of GENERAL MOTORS CORP.

Install the starter. Refer to Starter Motor Replacement (2.2L (L61)) or Starter Motor Replacement (2.0L (LSJ)) in Engine Electrical.
Perform the CKP system Variation Learn Procedure. Refer to CKP System Variation Learn Procedure .