LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Wipers System And Washers System) >> Repair Instructions >> Washer Pump Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the washer solvent from the washer solvent container.
  2. Remove the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  3. Disconnect the washer pump electrical connector.
  4. Disconnect the washer pump hose.
  5. Using a small flat-bladed tool, remove the washer pump from the washer solvent container.
  6. Using a small flat-bladed tool, remove the seal from the washer solvent container.
  7. Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor
    GM815208Courtesy of GENERAL MOTORS CORP.