LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Wipers System And Washers System) >> Repair Instructions >> Washer Solvent Container Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the washer solvent container to the left frame rail.
  2. NOTE: Refer toFastener Notice in Cautions and Notices.
  3. Install the washer solvent container screw.

    Tighten:  Tighten the screw to 10 N.m (89 lb in).

  4. Fig 1: Locating Washer Solvent Container
    GM869670Courtesy of GENERAL MOTORS CORP.
  5. Connect the washer pump electrical connector.
  6. Connect the washer pump hose.
  7. Install the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  8. Fill the washer solvent container with washer solvent.