LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Wipers System And Washers System) >> Repair Instructions >> Wiper Motor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the wiper motor to the wiper drive system module.
  2. NOTE: Refer toFastener Notice in Cautions and Notices.
  3. Install the wiper motor screws.

    Tighten:  Tighten the screws to 8 N.m (71 lb in).

  4. Install the wiper motor crank arm and crank arm nut.

    Tighten:  Tighten the screws to 25 N.m (18 lb ft).

  5. Fig 1: View Of Wiper Motor
    GM1235608Courtesy of GENERAL MOTORS CORP.
  6. Install the wiper drive system module. Refer toWiper Drive System Module Replacement .
  7. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.