LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Stationary Window System) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Connect the rear window defogger electrical connectors.
    3. Fig 1: Locating Rear Window Defogger Electrical Connector
    GM401856Courtesy of GENERAL MOTORS CORP.
  3. Install the rear window radio antenna connector.
    4. Fig 2: Rear Window Radio Antenna Connector
    GM181953Courtesy of GENERAL MOTORS CORP.
  4. Verify the radio has reception.
  5. Install the rear upper garnish moldings. Refer to Garnish Molding Replacement - Lock Pillar Upper in Interior Trim.
  6. Install the rear roof rail appliques. Refer to Molding Replacement - Roof Weld Joint Reveal - Rear (Coupe) or Molding Replacement - Roof Weld Joint Reveal - Rear (Sedan) in Exterior Trim.
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals