LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Lighting Systems) >> Repair Instructions >> License Lamp Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the license lamp bulb to the socket, if required.
    2. Fig 1: View Of License Lamp Bulb & Socket
    GM741330Courtesy of GENERAL MOTORS CORP.
  2. Install the license lamp socket to the license lamp by rotating the socket clockwise.
  3. Install the license lamp to the rear compartment lid applique.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the license lamp screws to the license lamp.

    Tighten:  Tighten the license lamp screw to 2 N.m (18 lb in).

    5. Fig 2: View Of License Lamp
    GM741329Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals