LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle - Mu3 >> Repair Instructions >> Axle Seals Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing Axle Seal
    GM895455Courtesy of GENERAL MOTORS CORP.
  1. Use the SA9133T  to install a new seal. See Special Tools . Ensure that the seal is seated flush to the outer bore area.
  2. Install the wheel driveshaft or intermediate drive shaft. Refer to Wheel Drive Shaft Replacement or Intermediate Drive Shaft Replacement in Wheel Drive Shafts.
  3. Install the front tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (4 Lug Wheel) or Tire and Wheel Removal and Installation (5 Lug Wheel) in Tires and Wheels.
  4. Lower the vehicle.