LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Outlook XR, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Accelerator Pedal Position Sensor Assembly
    GM1858231Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Remove the knee bolster. Refer to Knee Bolster Replacement .
  3. Remove the instrument panel wiring harness electrical connector (2) from the accelerator pedal position (APP) sensor assembly.
    4. Fig 2: View Of APP Sensor Bolts & Sensor
    GM1858232Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Due to clearance issues, the upper attachment bolt cannot be removed from the APP sensor assembly. Loosen the bolt completely and leave the bolt in the component until the assembly is removed from the vehicle.
  4. Remove the APP sensor bolts and sensor assembly from the vehicle.
scientia non olet · About LEMON Manuals