LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2008 >> Astra XE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Camshaft Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    NOTE: Refer to Fastener Notice .
  1. Install the camshaft position sensor of the exhaust camshaft.

    Tighten:  Tighten the bolt to 6 N.m (53 lb in).

    • Connect the wiring harness of the oxygen sensor to the bracket.
    • Install the wiring harness plug.
  2. Install the camshaft position sensor, intake camshaft.

    Tighten:  Tighten the bolt to 6 N.m (53 lb in).

    Connect the wiring harness plug.

  3. Close the hood.
scientia non olet · About LEMON Manuals