Removal Procedure
- Open the hood.
- Disconnect the battery.
- Remove the ground connection from the negative terminal.
- Loosen the nut.
- Raise the vehicle by its full height.
- Remove the intake manifold support (2).
- Disconnect the wiring harness plug of the catalytic converter control oxygen sensor.
- Disconnect the wiring harness plug (1) from the bracket.
- Remove the 2 bolts (3).
- Disconnect the knock sensor wiring harness plug (1).
- Remove the knock sensor.
Remove the bolt (2).
CAUTION:
Refer to Battery Disconnect Caution
.