Installation Procedure
- Attach TCM (1) to the bracket.
Replace the cable ties (arrow).
- Attach the wiring harness plug (1) to the bracket.
Lock (arrow) must engage.
- Attach the wiring harness plug (4) to the TCM.
Connect and lock the wiring harness plug.
- Connect the wiring harness plug (3).
- Attach the cable tie (2) to the bracket.
- Attach the cable tie (1).
- Install the vent duct (1).
- Install the center console. Refer to Front Floor Console Replacement .
- If a replacement TCM was installed, program the module. Refer to Control Module References .
IMPORTANT:
Note guides for positioning the control unit on the bracket.
IMPORTANT:
Check for proper seating.