System Specifications

Front Brakes

Brake rotor maximum allowable thickness variation 0.025 mm (0.001 in)
Brake rotor minimum allowable thickness after refinishing 23 mm (0.906 in)
Brake rotor discard thickness 22.8 mm (0.898 in)
Front brake rotor maximum allowable assembled lateral runout 0.05 mm (0.002 in)

Rear Brakes

Brake rotor minimum allowable thickness after refinishing 12.0 mm (0.472 in)
Brake rotor discard thickness 11.8 mm (0.465 in)
Rear brake rotor maximum allowable assembled lateral runout 0.05 mm (0.002 in)
Brake rotor maximum allowable thickness variation 0.025 mm (0.001 in)