Installation Procedure
- Install the quarter window into the opening. Refer to Adhesive Installation of Encapsulated Stationary Windows .
- Install the fasteners located on inside of the quarter window.
Tighten: Tighten the fasteners to 10 N.m (88 lb in).
- Connect the electrical connectors to the antenna, if equipped.
- Install the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement .
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the liftgate.
CAUTION:
Refer to Fastener Caution
.