July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fan Control Module Replacement (HP5)

Fig 1: Fan Control Module

GM2148062

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedures

Remove fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (LCS)
Remove underhood electrical block. Refer to Underhood Electrical Center or Junction Block Replacement (HP5)
Disconnect electrical connectors from cooling fan control module.

1

Cooling Fan Control Module Bolt

CAUTION: Refer to Fastener Caution .

Tighten: 8 N.m (71 lb in)

2

Cooling Fan Control Module