Calibration Procedure
WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The liftgate must be in the full closed position when performing the liftgate calibration procedure. Failure to do so will result in a failed liftgate calibration.
- Close the liftgate.
- Install a scan tool.
- Clear All DTCs before proceeding.
- Navigate to the Liftgate Module menu.
- Select Module Setup menu item.
- Select LGM Open/Close Test and follow the directions displayed on the screen.