Rear Wheel Alignment

REAR WHEEL ALIGNMENT

INSPECTION
1. INSPECT TIRE
a. Inspect the tire.
2. INSPECT VEHICLE HEIGHT
a. Inspect the vehicle height.

NOTICE: Before inspecting wheel alignment, adjust the vehicle height to the specified value.





3. INSPECT TOE-IN

Standard toe-in:

Standard toe-in
If the toe-in is not within the specified value, inspect the suspension parts and replace them if necessary.
4. INSPECT CAMBER
a. Install the camber-caster-kingpin gauge or position the vehicle on a wheel alignment tester.
b. Inspect the camber.

Standard camber:

Standard camber
If the measured value is not within the specified value, inspect the suspension parts for damage and/or wear, and replace them if necessary because the camber is not adjustable.