Air Flow Meter/Sensor: Service and Repair

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE MASS AIR FLOW METER




a. Disconnect the MAF meter connector.
b. Remove the 2 screws and MAF meter.
c. Remove the O-ring from the MAF meter.

INSTALLATION

1. INSTALL MASS AIR FLOW METER




a. Install a new O-ring to the MAF meter.
b. Install the MAF meter with the 2 screws.
c. Connect the MAF connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL