LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2007 >> tC Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control System (2AZ-FE) >> Knock Sensor >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor: Inspection

  1. INSPECT KNOCK SENSOR 
    1. Measure the resistance of the sensor.

      Standard resistance 

      KNOCK SENSOR TESTER CONNECTION AND SPECIFIED CONDITION

      Tester Connection Specified Condition
      1 (Ground) - 2 (Output) 120 to 280 kΩ at 20°C (68°F)

      If the result is not as specified, replace the knock sensor.

      Fig 1: Measuring Resistance Of Knock Sensor
      G04869388Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals