October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
On-Vehicle Inspection
- REMOVE IG2 RELAY (Marking: IG2)
- Remove the engine room relay block cover.
- Remove the IG2 relay from the engine room relay block.
- INSPECT IG2 RELAY
- Measure the EFI relay resistance.
Standard resistance
RESISTANCE SPECIFIED CONDITIONS
| Tester Connection |
Specified Condition |
| 3 - 5 |
10 kΩ or higher |
| 3 - 5 |
Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the result is not as specified, replace the relay.
- INSTALL IG2 RELAY