LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> xB Standard >> Repair and Diagnosis >> Engine Performance >> System >> 2AZ-FE Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Integration Relay >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Integration Relay: Removal

  1. REMOVE NO. 1 RELAY BLOCK COVER 
  2. REMOVE INTEGRATION RELAY 
    1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the integration relay.
    2. Disconnect the 3 connectors.
      Fig 1: Identiyfing Integration Relay Claws
      G05387014Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals