LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starter >> 2ZR-FE Starting >> Ignition Switch >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Switch: Inspection

  1. INSPECT IGNITION SWITCH ASSEMBLY 
    1. Check the resistance.
      1. Measure the resistance according to the value (s) in the table below.

        Standard resistance 

        RESISTANCE REFERENCE

        Tester Connection Condition Specified Condition
        Between all terminals LOCK 10 kΩ or higher
        2-4 ACC Below 1 Ω
        1-2-4 ON Below 1 Ω
        5-6
        1-3-4 START Below 1 Ω
        5-6-7
        Fig 1: Identifying Ignition Switch Connector Terminals
        G05399828Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals